Combine output with two different input driver [SOLVED]

[Diztly Wardizt]

Hallow everyone,

I need a solution to overcome the two drivers of different inputs in 1 controller.

1. This driver requires input HIGH to off
driver with HIGH to Off


2. while the mosfet driver using IRLZ44N use LOW to off.

i need 1 diver to invert output.

how to solve this problem.

Thankz

[Fernando Garcia]

Hi!

In the tab LEDs find:

Code: Select all

    b_out = bled_out;
    w_out = wled_out;
    rb_out = rbled_out;
    r_out = rled_out;
    uv_out = uvled_out;
    moon_out = moonled_out;


Replace the line corresponding to the channel that you will use this driver by something like this:

Code: Select all

    b_out = (255 - bled_out); // Blue
    w_out = (255 - wled_out); // White
    rb_out = (255 - rbled_out); // Royal blue
    r_out = (255 - rled_out); // Red
    uv_out = (255 - uvled_out); // UV
    moon_out = (255 - moonled_out); // Moonlight


Best regards.

[Diztly Wardizt]

ok. thanks Verymuch.


diztlyWardizt.