Night mode for wave maker [SOLVED]

[Sueur Aurelien]

HI
I wanted to know if there was an automatic night mode for the wave maker with timer or light sensor ?

Thanks

[Fernando Garcia]

Hi!

On moment this functions not exist.

You can add this function is very simple.

If you want reduce the power when all day lights are OFF.

Go to tab "Wavemaker" and find:

Code: Select all

   
analogWrite(wavemaker1, Pump1PWM);
analogWrite(wavemaker2, Pump2PWM);


Replace with:

Code: Select all

   
  if((bled_out == 0) && (wled_out == 0) && (rbled_out  == 0) && (rled_out == 0) && (uvled_out == 0))
  {
  analogWrite(wavemaker1, int(Pump1PWM * POWER));
  analogWrite(wavemaker2, int(Pump2PWM * POWER));
  }
  else
  {
  analogWrite(wavemaker1, Pump1PWM);
  analogWrite(wavemaker2, Pump2PWM);   
  }


Where "POWER" is the value to reduce.

Example if you want reduce to 50% use:

Code: Select all

  analogWrite(wavemaker1, int(Pump1PWM * 0.50));
  analogWrite(wavemaker2, int(Pump2PWM * 0.50));


Best regards

[Sueur Aurelien]

Great !

Thank you for this additional code to an essential function for me with my 4 pumps wp60 Jebao.

I Understand That You very well follow the project !!

thank you for all

[Fernando Garcia]

You're welcome!