Forum Members section DIY Ferduino controller Conflict tft shield/ethernet shield

Conflict tft shield/ethernet shield  [SOLVED]

Ask here about your controller made with pieces purchased in other shops.

Post Number:#1 Post Thu Jan 24, 2019 8:05 am
Posts: 24
Topics: 7
Images: 5
Solve rating: 0
Joined: Wed Dec 05, 2018 5:23 pm
Topics: 7
Age: 42
Gender: None specified
National Flag:
Italy
hi Fernando,
sorry for this post but I could not understand what changes I have to do at the ethernet shield.
I removed the pins 50,51,52,53 from the tft shield and unplugged the pins 10,11,12,13 of the ethernet shield.
on the code I enabled the sd on pin 53 and disabled pin 4.
unfortunately, however, I always have the inscription to insert the sd.
I can not understand how I can resolve this conflict
regards

Post Number:#2 Post Thu Jan 24, 2019 9:43 am
Posts: 1699
Topics: 38
Images: 301
Solve rating: 233
Joined: Mon Mar 03, 2014 5:59 pm
Topics: 38
Age: 39
Location: São Paulo
Gender: Male
National Flag:
Brazil

Hi!

on the code I enabled the sd on pin 53 and disabled pin 4.


It's wrong!

For SD card on ethernet shield the SS pin is 4.

The code should be like this:

#define USE_PIN_4_FOR_SD_CARD
//#define USE_PIN_53_FOR_SD_CARD


Best regards.
Post your doubts on forum because it can help another user too. Just PM me for support if it's absolutely necessary.




Return to DIY Ferduino controller





Who is online

Users viewing this topic: No registered users and 1 guest

cron