Sorry for my very bad English
I use Ferduino English Master with Hungarian text...
All work fine,but metering pumps does not work!Like this topic :
viewtopic.php?f=24&t=314&hilit=metering
But in ferduino english this is the only:
//************************** Dispositivos SPI *********************************************
//*****************************************************************************************
const byte SD_CARD = 0;
const byte ETHER_CARD = 1;
const byte RFM = 2;
const byte ChipSelect_SD = 5;
const byte SelectSlave_ETH = 53;
const int ChipSelect_RFM = A15;
//*****************************************************************************************
const byte SD_CARD = 0;
const byte ETHER_CARD = 1;
const byte RFM = 2;
const byte ChipSelect_SD = 5;
const byte SelectSlave_ETH = 53;
const int ChipSelect_RFM = A15;
I changed ChipSelect_SD = 4; to ChipSelect_SD = 5; but still does not work!
Do you have any idea what could be the problem?
please help,thanks
Roland