thank you and excuse me however, I followed the advice I read such a book, but I find it hard to understand how it works equally

If this variable is commented it should work. #define USE_PINS_18_AND_19_FOR_RTC Serial 2 and 3 are used for stamps. If it doesn't work I have no idea about the reason and I haven't hardware (GSM module) to make tests.

i need sd card? Obviously. I'll close this topic because the initial question was answered.

I think this problem was solved, so I'll close this topic.

Hi! Everything seems solved here so I'll close this topic. Best regards.

Please don't ask me anything more about this module. This module is not in my part list therefore there no support for it. I think the initial question was answered so I'll close this topic.

Hi! Don't forget that to use a PCF8575 is needed connect the RTC on pins 18 and 19. You should move pins from 20 and 21 to 18 and 19 then make a bridge like this. Also uncomment this line: #define USE_PINS_18_AND_19_FOR_RTC Best regards.

I think this problem was solved so I'll close.

Hi! Use latest version of Ferduino code, download the IDE 1.6.10 and follow this tutorial: Best regards.

Now... It seems to be OK.. I put one uln2003a before the connections to the relay board... Doing as you told. Thanks for the patience. :D

Lock up issue is solved. Was problem with my pwm circuit for pump control.

Hi! Glad to hear. As always is better search before ask. Best regards.

Save your time use the search. I found the answer on first result:

Hi! Try this: if (digitalRead(sensorerabbocco) == LOW) { if (allarme_rabbocco == false) { if (digitalRead(pinrabbocco) == LOW) { temporabbocco = millis(); } digitalWrite(pinrabbocco, HIGH); } } else { digitalWrite(pinrabbocco, LOW); allarme_rabbocco = false; } if (((millis() - temporabbocco) >...

Glad to hear!

Hi! All things for home screen are in the tab "Inicio", time and date on menu for adjust is in the tab "L_Menu". There changes to make in "Funções" look for: void printHeader(char* headline) void desenhar_barras_periodo () You can copy this parts from Willie's code....

Hi! Welcome Bruce! In the new RTC library select the language at "DS1307_HENNING.h". Comment this line: #define PORTUGUESE_L Uncomment this line: // #define ENGLISH_L It's explained here: Best regards.

[quote=" Fernando Garcia » Yesterday 8:44 pm ":kdalclk8]Hi! There 3000 bytes free in the EEPROM. Best regards. thanks brother. :-bd :-bd have nice day.

[quote=" Simone Sandonati » Fri Jul 22, 2016 6:42 pm ":36071t5s]Hello where did you get the icons to do the menu ?? thank you you can find google images for free usage Google Flat Icon this my icon

Hi! Comment the line bellow or connect a PCF8575 to your controller. #define USE_PCF8575 Best regards.

Hi! For wavemaker set the PWM to zero in manual mode. This feature is available for others devices only in the web interface. Best regards.

Hi! The pin state for this devices are compatibles, so in this case there no conflict. Best regards.

Hi! Dear friend, as I told I won't give support to parts that are not in my part list or are not needed to Ferduino Aquarium Controller. Please ask help here: Best regards.

Hi! The old code is not compatible with the new IDE. The code will work with 1.0.x only. Best regards.