To start Arduino Due haven't an EEPROM. If you want make Ferduino work with Arduino Due you should make it by yourself or ask help in Arduino forum. Arduino Due or max32 are not in my part list so won't give support for it.

I thought that it is simpler just compare ph as you want and ph read from probe than on/off reactor or ozonator. Thank you for help and explain how this part of software works. I will owe you a beer if you are in Poland :-bd Best regards

thx all and fernando. :-bd :-bd is works fine. go to hardwork to change visual display.

Hi! Welcome Edward! Sorry I can't help you, this TFT is not compatible with my code. Best regards.

ok. thanks Verymuch. :-bd :-bd diztlyWardizt.

Hi Fernando, Thank you very much for the help,your the best. ^:)^ Kind regards Len

Hi Fernando, I bought it right now. So... I give you some peace... for now... uahahua Thanks

Fernando Thanks Work fine!! Now I fight with the Touch. I upload the Utouch calibrate... but the touch not response. Let me find for something. Thanks...

Hi! Are you talking about this variable? const byte ChipSelect_SD = 4 On setup try change this variable: SPI_HALF_SPEED To: SPI_QUARTER_SPEED There no file to place on SD card. Best regards.

Hi fernando , thanks for the reply I have it working. What happened is that there had connected the pins 20-21 and the TFT screen was bright white. Greetings and thanks.

Fernando will try to add it ok if I can have it work Thank you

O.k you are right!!! any way thanks. Best Regards.

Hi! It no makes sense to me because Ferduino code clears the EEPROM automatically on first boot but I'm glad that the problem was solved. Best regards.

Hi! Welcome Juan! Yes, Ferduino can work without a LCD but the latest version doesn't work with Joyreef. In the Ferduino tab find this line and comment out. #define USE_TFT Visit the new web interface here: Best regards.

Hi! Only to alert, this feature is available in latest version of Ferduino code on Github. :) Best regards.

Hi! Glad to hear! Best regards.

ok. thank you very much. :-bd i try later. and reviewing after it

Hi! Have you tested with a code for test available on forum? Have you changed "chipSelect" value to 53? In Ferduino tab find: //const byte ChipSelect_SD = 4; const byte ChipSelect_SD = 5; const byte SelectSlave_ETH = 53; Replace with: const byte ChipSelect_SD = 53; //const byte...

Thank you very much Fernando

Hi! Do you know how to see the video on browser? Here you can find many models of camera and your URL. Best regards.

Hi! Is possible use the original code but will fill only 1/4 of your TFT since the code was done to 400 x 240. To use Willie's version is needed wait for an update in his code. Best regards.

OK once again thank you for your help and for your work. Best regards, Jean-Yves

After select DHCP this line will be useless. byte ip[] = {192, 168, 0, 177}; Since that initial issue was solved the topic will be closed. To any other question please create a new topic.

Hi! Welcome Michael! No changes on code is required to use a single stamp without multiplexer. Only connect the stamp directly in serial port 3. Best regards.