thank you
in fact both millis that PWM1 with the speeds are different if they are on screen inicio times are very fast

and then normal for displaying the graphic wavemaker everything slows down

it would take a more powerful arduiono

I try to explain it this way:

the PWM1 value is equal to 0 if they are in wavemaker screen for a time of 12 seconds
if you go will screen menu or menu inicio the PWM1 value of 0 for a time of just 5 seconds

pretty much the go more fast pumps depending on the screen

thank you

how can I make a video frame it if the pumps do not know if you can see I try maybe with the tester connected to the pump output

I connected the pumps when they step to the start menu the pumps do not follow more times and go much faster do not know if I explained if I use the mode 1 or 2 etc. the defect does not occur step_time if I put it in 1000 operates all right but quersto way pome go real slow I would like the mode 1 a...

Thanks for your help I wanted to decrease the step_time 1000 milliseconds to 10 millisecond to increase the speed of climb and descent I located a problem if I'm okay in wavemaker screen works well if I move on the home screen does not keep him more step_time set but charged on a much more high spee...

You can fit a mosfet IRFZ44N instead of a IRLZ44N ???

Hello
I have a neon light t5 with ballast dimmable 0-10 v might fit this scheme to pilot them with Arduino?

yes thank you to convert images in RAW I know him but if I write me error code I do not understand where I'm wrong ferduino tab unsigned int *MoonPic; //Pointer to the Lunar Phase Pics extern unsigned int //Lunar Phase Pics New_Moon[0xD24] = myFiles.loadBitmap(7, 80, 200, 60, "newmoon.raw"...

yes thank you to convert images in RAW I know him but if I write me error code I do not understand where I'm wrong ferduino tab unsigned int *MoonPic; //Pointer to the Lunar Phase Pics extern unsigned int //Lunar Phase Pics New_Moon[0xD24] = myFiles.loadBitmap(7, 80, 200, 60, "newmoon.raw"...

I could not read the sd I added this code and it worked in tab setup myfile.begin(ChipSelect_SD, SPI_FULL_SPEED); in tab ferduino SdFat myfile; now it works fine thank you I need more help I wrote the code to display the images of the moon phase by loading them in the code in .c in tab moonPhase if ...

I did the test that you suggested and loaded the example "Load_image.ino" works fine

I tried to add in ferduino code but does not load the wallaper

maybe I can not understand on what tab I have to write different code strings

hello Fernando I tried to use this library to display the images in .raw format, but the image is not displayed this is the code I used how to use the sd card integrated in the TFT display I copied prova.raw image files with one resolution 150 * 150 in Ferduino TAB #include <UTFT_SdFat.h> onst byte ...

I am still stuck to the code I posted above I do not know how to move forward and for this I ask help

thank you

do not help me please ????

should I use a Millis right?

but I do not know how to set it up

help me?

I used this scheme

thanks

I do the test

and because the new moon is never turned off even by setting the minimum value to 0?

thanks

exactly when they are on the LEDs of the lighting


the LED of the moon should be turned off

sorry but I do not know how you can edit a post I wanted to also ask how can I do so that day the moon led is off I modified this way but does not work float lunarCycle = moonPhase(t.year, t.mon, t.date); //get a value for the lunar cycle moonled_out = MinI *(1 - lunarCycle) + MaxI * lunarCycle + 0....

hello

I wanted to know why if I set to 0, the minimum value of the new moon, the LED is never turned off completely?